Galaxy Dimension DCM EXIT

[James Schultz]

Dear Security Installer Forum Members,

For my installer team , I need a request from you. We install Dimension series in a building. By the way we could not configure the exit module while we configured entry.

When I read on the manual it tells about activating exit on the menu, but how? 

I appreciate for your replies.

Dimension Installer Manual , 69.3 = DCM
This option is used to program the Galaxy Door Control Module (DCM) access control readers. The DCM
can be fully integrated into the system, communicating on the AB lines and fully utilising the facilities of the
Galaxy control panel. Each DCM can control up to two readers. The exit reader can be replaced with a
request to exit button.
When enabled, the options that are eligible for DCM programming are made available throughout the menu,
otherwise they do not appear, or appear as Option not Available.

Edited April 19, 2016 by James Schultz

[james.wilson]

I dont understand what your asking?

[James Schultz]

Dear James ,

I have DCM module. C080 is the name of the product.

You can find the product in this link http://www.security.honeywell.com/uk/products/intruder/control-panels/accessories/accesscontrol/466174.html

I configured the card readers, Card readers are working now, but I have an exit button. I do not know how to configure the programming of Exit button to the DCM module. I made wiring of exit button to the DCM Module. 

Is it clear now? 

Thanks for your quick reply.

 

 

[james.wilson]

You wire it into the dcm. Can you upload a picture of the pcb?

[James Schultz]

Hi James ,

Here you can see the pictures.

Do you see anything wrong?

[Nova-Security]

Thought a DCM was looking for o/c going to 1K on the RTE not 2K going to 1K

[James Schultz]

Can you explain more ? Should I connect 1K to module?  If possible can you show on picture? 

Thank you very much

 

[Nova-Security]

have you made sure that the door contact or how you are monitoring the lock is showing closed (1k), DCM wont open the door if it already showing open.

[James Schultz]

Thanks for your answer. We wired as you said but it did not work. After wiring is it needed to program over keypad ? 

[jammin31]

It sounds like you would benefit from someone who knows this setup popping over to assist you, if your an installer have you tried tech support ?