Jump to content
Security Installer Community

Intruder fault help!


Recommended Posts

Hi guys, can anyone help me out with the following.

 

I have an accenta compact. My problems first started with zone 1 which is a PIR.

The keypad was showing the zone 1 LED and the internal sounder was producing a rapid tone. This was preventing the system being armed. 

 

I joined through the the alarm and tamper pair in the PIR and the above stopped and I could arm the system. So I replaced this PIR. The system then allowed me to arm.

 

However, the following day external siren was activated but There was no indication as to what caused the alarm. 

I then had trouble silencing the external sounder. The system would even allow me to arm it while the sounder was still

sounding.

 

I undid the bel box to find a couple of fairly loose connections. I tightened these but now the bell box does not trigger. But. If I remove the fuse in the panel then the sounder operates via its batteries. 

 

Can an anyone point me in the right direction so that I can get things back up and running? 

 

Thanks in advance!!

 

 

Link to comment
Share on other sites

Thanks for the reply. 

 

The tamper connection was loose when I opened up the bell box. All connections are now tight.

 

what is the best way to test to clarify to root cause?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.