Telecom elite 48-w install

[9651]

Must be to do with the mesh then, as a galaxy will just report the device as an rf fail when flat 

[sixwheeledbeast]

Only ever had poll failures here.

[GalaxyGuy]

  On 25/05/2016 at 19:17, 9651 said:

Must be to do with the mesh then, as a galaxy will just report the device as an rf fail when flat 

Expand  

 

Perhaps with the old RF RIO with the Galaxy, but not with the RF portal. It should be reporting '+RF BAT Low' before the fail.

[secureiam]

  On 25/05/2016 at 19:17, 9651 said:

Must be to do with the mesh then, as a galaxy will just report the device as an rf fail when flat 

Expand  

 

no idea but I see your logic, as to the jam.

 

you would have thought that the device that's flat would turn off give a device fail and the mesh self heal so no jamming? things are never that simple mind.

[9651]

  On 25/05/2016 at 20:04, GalaxyGuy said:

 

Perhaps with the old RF RIO with the Galaxy, but not with the RF portal. It should be reporting '+RF BAT Low' before the fail.

Expand  

Correct 

[isecurity]

Update from TS QD and XT sensor should only be used in Auto and NOT Hybrid, Misprint in only Ricochet manual that says otherwise. Hence why they default to Auto

[isecurity]

RE Jamming

 

Response from TS

 

"Radio jamming is generally site specific. Points to look for are other wireless equipment, old wireless equipment from an older system, unused Ricochet devices with the batteries still connected, smart keys, contacts etc."

 

 

[Nieldmail]

  On 27/05/2016 at 15:23, isecurity said:

Update from TS QD and XT sensor should only be used in Auto and NOT Hybrid, Misprint in only Ricochet manual that says otherwise. Hence why they default to Auto

Expand  

Thanks for taking the time to find out