Security Alarm help required

[1950Norman]

Don't think there is a rear one

[norman]

Not familiar with the unit but often the rear is just an extension of the front via a small plastic plunger. 

[james.wilson]

I think its all on one switch but if u heard it click you will need to meter your tr and other tamp circuits

[al-yeti]

One switch on right no rear tamper 

 

Rear tamper just mount high under the gutter so no one can get to it

[1950Norman]

It is meant to click to prove that the tamper switch is working

It has no rear tamper switch

Edited December 24, 2016 by 1950Norman

[james.wilson]

just cos it clicks doesn't actually mean its working, highly likely though

[1950Norman]

Latest update, have now got my alarm working, did a factory reset to the control panel. Everything is working ok, the only thing that is giving me a problem is the entry time to my garage, the alarm is going off immediately. I have tried to alter the time to 20 seconds as instructions but it will not change. Any ideas.

[james.wilson]

which circuit os the garage on?

[1950Norman]

I have 2 keypads, zone 1 is for the hall zone 2 is for the garage. Exit times in both zones is 20 secs and works ok, entry time to the hall zone 1 is 20 secs and works ok. 

[Danfs]

Is the garage zone setup as a exit entry route?