Jump to content
Security Installer Community

Recommended Posts

Posted
24 minutes ago, datadiffusion said:

Bristol Water sites appear to favour the Reson8. Classy. Although no-one is ever going to hear them in the middle of sodding nowhere and the systems are almost certainly monitored.

 

I was honestly surprised when I walked past a Reson8 sounding, the ba***rd was so loud, I had to cross the road, and cover my ears! Much louder than 115 dB, I am sure. If ADE put them in a nicer casing, and covered the electronics, it would be a good bell box. 

 

21 minutes ago, MrHappy said:

 

I could do with p/t engineering staff, I don't have the time to spend 5 days a week with a novice,

 

So was toying with someone in p/t study

 

Sounds good :) Part time? I finish school in June, anyway. 

 

17 minutes ago, andy™ said:

 

there is a lot more than just a grey humming box. usually lots of exposed live busbars on the side of it that you dont want to be touching

 

Well, if you ignore the DANGER OF DEATH     KEEP OUT signs, you get what's coming to you. 

  • Upvote 1
Posted
23 minutes ago, andy™ said:

 

there is a lot more than just a grey humming box. usually lots of exposed live busbars on the side of it that you dont want to be touching

 

It was a while ago but I'm pretty sure everything was totally enclosed - didn't venture past the door. I don't know much about distribution (although am a qualified spark) but we are only talking a 4" square room here.

No doubt it was only fully enclosed being it dated from the 30s and nowadays it would be either totally exposed like the newer kit around the area or in a plastic shed.

33 minutes ago, MrHappy said:

So was toying with someone in p/t study

 

ME ME PLEASE CHOOSE ME!

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Posted
14 minutes ago, datadiffusion said:

 

It was a while ago but I'm pretty sure everything was totally enclosed - didn't venture past the door. I don't know much about distribution (although am a qualified spark) but we are only talking a 4" square room here.

No doubt it was only fully enclosed being it dated from the 30s and nowadays it would be either totally exposed like the newer kit around the area or in a plastic shed.

 

ME ME PLEASE CHOOSE ME!

 

Around here, we have brick built substations, but they have plastic roofs, look strange, and a smelly old yellow Sonade with rusty bolts. I think the LEDs still flash in them, well, most of them anyway. 

 

I'd love to be an engineer, sounds like a good job, with no day the same. 

Posted (edited)
21 hours ago, datadiffusion said:

 

It was a while ago but I'm pretty sure everything was totally enclosed - didn't venture past the door. I don't know much about distribution (although am a qualified spark) but we are only talking a 4" square room here.

No doubt it was only fully enclosed being it dated from the 30s and nowadays it would be either totally exposed like the newer kit around the area or in a plastic shed.

 

 

depends on the age i guess. newer ones are probably more enclosed, older stuff is fairly open. rarely ever get to see the inside of them, but this was from a recent trip inside one. plenty bits you dont want to touch

 

P1150825%20-%20Copy_zpshs6bst9g.jpg

 

and then there are private, fully enclosed ones like this. 11kv transformer is on the other side of the wall with 230/400v tails going straight into this

 

P3166725_zpssuoztg8t.jpg

 

Edited by andy™
Posted

Ah well it could have well looked like that round the back I guess then, didn't actually go in!

 

I remember one year they had loads of drums of oil outside, I had no idea it actually degraded and wasn't 'sealed for life'

 

http://www.electricenergyonline.com/show_article.php?article=172

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Posted

some have oil but i dont think they all do. iirc the older oil is also very carcinogenic. but not something i have anything to do with, i just get to have a look on the odd occasion

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.