Davidaiken Posted June 16, 2017 Posted June 16, 2017 I have a ptz cam that fed by fibre to an encoder then fed to cam via coax and separate twin pair telemetry. I did hard reboot on cam and now I have this on camera screen Vps 4800-101 Duplex - And I'm not sure what this means or why its appeared any help would be great Quote
james.wilson Posted June 16, 2017 Posted June 16, 2017 some units show their address and protocol etc on boot until a telemetry command is received Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Davidaiken Posted June 16, 2017 Author Posted June 16, 2017 OK, it's not accepting a telemetry command. Could this be the camera or the cable ? Quote
james.wilson Posted June 16, 2017 Posted June 16, 2017 could be either or the protocol Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Nova-Security Posted June 16, 2017 Posted June 16, 2017 Put a LED no resistor across the 485 pair and it should pulse when telemetry commands are sent. Hard reboot of the camera, you have probably lost all programming and will need setting up again Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.