Kevalino Posted July 9, 2017 Posted July 9, 2017 I have a Powermaster 10 and have just bought an external siren (MCS-730) and the Powerlink3 module. I can't enrol the siren. There is no enrol button on the pcb and I have tried pressing the test button but this just sets off the alarm. The Powerlink module doesn't work either. Option 7 in the setup menu doesn't exist and the manual says that if this is the case, then make sure it's installed properly. It only has a flat ribbon cable and network lead, so not much to do wrong there. The packet was labelled Tyco and I wondered if it was specific to them? Not much help on the internet for this system and I think I may have made a mistake getting it. Quote
james.wilson Posted July 9, 2017 Posted July 9, 2017 adt Visonic wont work with mainstream Visonic. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Kevalino Posted July 9, 2017 Author Posted July 9, 2017 Thank you! Wondered if this was the problem. Any idea on the siren? Quote
datadiffusion Posted July 9, 2017 Posted July 9, 2017 (edited) Won't all parts have 'tyco' on though as ADT or not they still own Visonic? Edited July 9, 2017 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
al-yeti Posted July 9, 2017 Posted July 9, 2017 6 minutes ago, Kevalino said: Thank you! Wondered if this was the problem. Any idea on the siren? Plenty on eBay i assume 2 minutes ago, datadiffusion said: Won't all parts have 'tyco' on though as ADT or not they still own Visonic? Nah unlikely Quote
datadiffusion Posted July 9, 2017 Posted July 9, 2017 (edited) 3 minutes ago, al-yeti said: Nah unlikely Why not? Even the webby shouts it out, unlike many others who keep their ultimate ownership quiet, i.e. you won't find 'Mondelez' (Cadbury) on Green & Blacks bars. Edited July 9, 2017 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
Kevalino Posted July 9, 2017 Author Posted July 9, 2017 Not solved my problems yet but at least there is somebody out there who knows about the Visonic system! Quote
james.wilson Posted July 9, 2017 Posted July 9, 2017 the adt/tyco system is different. They lock it to their version, as they should cos all are sold at a loss. Unfortunately this ends up on ebay (non paying customers or van stock or... etc) If you have an adt panel you need at least adt peripherals. If you have a non adt panel the nicked stuff wont work with it Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Kevalino Posted July 9, 2017 Author Posted July 9, 2017 Thanks, James. Had no idea about this - will try to get a refund and buy a proper one! Quote
sixwheeledbeast Posted July 9, 2017 Posted July 9, 2017 Doesn't matter the MCS730 is for the Powermax anyway. They have different sirens but look the same. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.