jonkem Posted July 9, 2017 Author Share Posted July 9, 2017 Top man, thank you. Now I can get out of it clean. Quote Link to comment Share on other sites More sharing options...
jonkem Posted July 11, 2017 Author Share Posted July 11, 2017 I'll add an update just in case anyone else is going to use a UR2 for this purpose. Thanks to simlec's input it's all up and running. Either SET terminal within the G4 panel can be used, J3 switches to neg & J9 shwitches to + upon arming so can be used to arm the UR2. Make sure you run 8 core originally or you'll end up adding 2 cores! UR2 is easy to set up once you've learnt to use their comic strip instructions. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 12, 2017 Share Posted July 12, 2017 Just out of interest, how does the UR2 signal jamming, supervision, and battery notifications? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
norman Posted July 12, 2017 Share Posted July 12, 2017 All along the watchtower.. 1 Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
al-yeti Posted July 12, 2017 Share Posted July 12, 2017 1 hour ago, datadiffusion said: Just out of interest, how does the UR2 signal jamming, supervision, and battery notifications? Probably needs another zone on the panel and another output , But then this geezer is stuck with what he put in Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 12, 2017 Share Posted July 12, 2017 (edited) (Probably another 3 if we're going to ) Just wondered as it has a 7 segment display, but not obvious from the spec exactly what this shows other than numerical zone activation (which I assume you can turn off). Edited July 12, 2017 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Simlec Posted July 12, 2017 Share Posted July 12, 2017 3 hours ago, datadiffusion said: Just out of interest, how does the UR2 signal jamming, supervision, and battery notifications? You have the tamper/fault output on the UR2 which you can put on a spare zone or wire in to the global tamper. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 12, 2017 Share Posted July 12, 2017 18 minutes ago, Simlec said: You have the tamper/fault output on the UR2 which you can put on a spare zone or wire in to the global tamper. And wouldn't THAT be fun on an LED keypad panel at 2AM! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
al-yeti Posted July 12, 2017 Share Posted July 12, 2017 44 minutes ago, datadiffusion said: And wouldn't THAT be fun on an LED keypad panel at 2AM! Still if you need upgrade great idea, bit they missed is a remote display or less or something Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted July 12, 2017 Share Posted July 12, 2017 Great idea if you have plenty of spare, programmable (+ pref. ability to be non-siren at 2AM 'technical' zones) IMHO. For all the future hastle better off just upgrading panel to same as your wireless choice, can't be much extra by the time you've splashed out on devices + RX (I assume universal RX dearer than expander). Doesn't the Euro Mini handle a single Pyronix expander? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.