Amps Posted August 18, 2017 Share Posted August 18, 2017 Have you any zones programmed for Area B? 1 Quote Link to comment Share on other sites More sharing options...
fatman Posted August 18, 2017 Author Share Posted August 18, 2017 29 minutes ago, Amps said: Have you any zones programmed for Area B? Yes, the same as Zone A apart from the upstairs sensors. Quote Link to comment Share on other sites More sharing options...
Amps Posted August 18, 2017 Share Posted August 18, 2017 Ok. I don't know. Quote Link to comment Share on other sites More sharing options...
fatman Posted August 18, 2017 Author Share Posted August 18, 2017 8 minutes ago, Amps said: Ok. I don't know. Ok, many thanks for your help and time. I've asked Pyronix so will post back here when I get a reply. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted August 18, 2017 Share Posted August 18, 2017 10 minutes ago, fatman said: Ok, many thanks for your help and time. I've asked Pyronix so will post back here when I get a reply. I think what amps is saying your missing something, unassign and go through it again , as he says if b is not highlighted , one of the steps is missing Assign all zones and see what happens perhaps I wonder have you only tried one zone? 1 Quote Link to comment Share on other sites More sharing options...
Amps Posted August 18, 2017 Share Posted August 18, 2017 Are you sure you only have one code programmed into the system? Quote Link to comment Share on other sites More sharing options...
fatman Posted August 18, 2017 Author Share Posted August 18, 2017 2 hours ago, al-yeti said: I think what amps is saying your missing something, unassign and go through it again , as he says if b is not highlighted , one of the steps is missing Assign all zones and see what happens perhaps I wonder have you only tried one zone? I will definitely try this tomorrow. All zones were assigned originally, but I still couldn't select to set Zone B when I entered the user code. I definitely only have the one code as I tried deleting all users and trying again to no avail. I've definitely done something wrong regarding zones. Do you mean zones as in A, B, C and D or zones as in Sensors? I presume you mean A, B, C and D in which case, I have been into these and amended the parameters to what I want, but it still would not let me. I had A and B as full and part set respectively, and C and D as unused. Thanks all for sticking with me through this, it's greatly appreciated! Quote Link to comment Share on other sites More sharing options...
Amps Posted August 18, 2017 Share Posted August 18, 2017 If you can set areasa A & B with the engineers code it suggests to me that the system is programmed correctly. I'm thinking the issue is with the code you are using. Try setting up another user code for area B only. 1 Quote Link to comment Share on other sites More sharing options...
fatman Posted August 18, 2017 Author Share Posted August 18, 2017 1 minute ago, Amps said: If you can set areasa A & B with the engineers code it suggests to me that the system is programmed correctly. I'm thinking the issue is with the code you are using. Try setting up another user code for area B only. Good idea. Hadn't thought of this. Will try and get back to you. Quote Link to comment Share on other sites More sharing options...
fatman Posted August 19, 2017 Author Share Posted August 19, 2017 11 hours ago, Amps said: If you can set areasa A & B with the engineers code it suggests to me that the system is programmed correctly. I'm thinking the issue is with the code you are using. Try setting up another user code for area B only. I've obviously done something wrong with the inputs or something because I'm only able to assign Zone A to a user. I'll go and have a look... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.