al-yeti Posted August 30, 2017 Posted August 30, 2017 8 minutes ago, cjdavi34 said: Thanks all for your help, I've done as al-yeti suggested and it all seems fine so far. One other question, the newer rf portal I have has more jumpers on it than the older version. Does it make much difference if the protocol on the portal is set to (a1+a2)or (a1+v2). I can't find any info that explains what the difference is nor can I find out much about the sensors Picture? I haven't seen that one Mr galaxy will may some thing soon? Quote
GalaxyGuy Posted August 30, 2017 Posted August 30, 2017 I'm not sure where Alpha 2 is used. The jumpers are correct. Peripherals should be configured for Alpha where possible, as it has better supervison. To conserve battery life, the detectors will back-off from reporting every event when constant motion is detected. Quote
datadiffusion Posted August 30, 2017 Posted August 30, 2017 (edited) Option 2 - Russian?! Presumably this enables the on-board mic and sets IPs for monitoring? Edited August 30, 2017 by datadiffusion Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.