Texecom opinions

[AdrianMealing]

  On 26/10/2017 at 20:39, Ashton said:

Again only rumours but I hear they are looking to create the first g3 wireless (fully encrypted) 

Expand  

They will have a bit of catching up to do. G3 wireless already exists. 

[datadiffusion]

Presumably the market doesn't demand it quite so strongly? 

[Ashton]

Never new thought it was stuck at grade 2 due to the lack of security 

[sjsturner]

Can honestly say I've had very little problems with Texe kit, I only ever fit elite panels though, never had a psu go wrong.

 

[Ashton]

For the price and what you get it is good just had my faith knocked with it recently few little things like timing out of engineers whilst I'm trying to adjust dt detectors then going off on tamper atleast on a galaxy,menvier etc I can just login to engineers and plod on happily without worrying 

[Ashton]

Isn't the ricochet technology licensed by one of the old boys on an agreement with texe bet he's quids in if it is 

[sixwheeledbeast]

  On 26/10/2017 at 21:05, Ashton said:

timing out of engineers whilst I'm trying to adjust dt detectors then going off on tamper atleast on a galaxy,menvier etc I can just login to engineers and plod on happily without worrying 

Expand  

 

That's a feature, if you have to do anything longer then the default 60 minutes then leave the end station open.

It's better than getting a call at 1700 that an engineers been done a service and left the panel in engineers.

[Ashton]

 sorry about that I'll take it out next service  just having a see what people's opinions are on different kit really every engineer will agree they have their own 'preferred panels' etc pros and cons 

[Ashton]

Could they not have something in the software atleast then so if it sees any active tamper whilst in engineers it resets the 60 minute timer or just doesn't exit at all if a device is in tamper condition so it's not just limited to the end station being left open 

[sixwheeledbeast]

When the timer expires (which can be adjusted BTW) the panel will check for tampers and stay in engineers if any active tamper is open.

All these "glitches" I here about must be features then.