sixwheeledbeast Posted December 15, 2017 Posted December 15, 2017 LED's are a good quick test of many common data buses. Some clever person at Texecom decided to build them into all the kit which is handy. Quote
al-yeti Posted December 16, 2017 Posted December 16, 2017 6 hours ago, sixwheeledbeast said: LED's are a good quick test of many common data buses. Some clever person at Texecom decided to build them into all the kit which is handy. Shame the onboard Rio LEDs are lunatics Quote
Moataz Posted December 17, 2017 Author Posted December 17, 2017 Guys I replaced the panels with one working and connected the push buttons.on it , and every thing was okay till I start to test , once the alarm is detected the bell and siren work for seconds then the keypad restart , is the battery can cause this issue ? Quote
james.wilson Posted December 17, 2017 Posted December 17, 2017 sounds like an overload, whats your alarm current? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
SouthernBrad Posted January 15, 2018 Posted January 15, 2018 As mentioned measure the systems current especially in an alarm condition. Also check the address pot on the rio that it is definitely clicked onto the number you require. Quote
james.wilson Posted January 15, 2018 Posted January 15, 2018 and spin it a few times if its somewhere cold/damp 1 Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.