CTEC XFP - LOOP INTEGRITY FAULT

[goncall]

Just connect the leave side of the loop see what devices are there/missing then diss the leave side of the loop and connect the return side of the loop and repeat if all devices are seen the panels goosed 

[al-yeti]

2 minutes ago, goncall said:

Just connect the leave side of the loop see what devices are there/missing then diss the leave side of the loop and connect the return side of the loop and repeat if all devices are seen the panels goosed 

Hardcore and simple

[norman]

Bit unfair, he's actually very astute.

[Josh Adams]

Thanks for your advise guys.

 

[sai]

How to clear loop integrity fault. No short in loop 

 

[MrHappy]

2 hours ago, sai said:

How to clear loop integrity fault. No short in loop 

 

just resetting should clear a fault free system....

 

remove 1 leg of loop at panel you should have + & - returning on the cables which are no in the panel?

 

if so check panel by removing field wiring & link loop out you should have every item on the loop missing but no loop fault ?

 

if not walk the system loop for yellow short led / check heads & external sounders for leaks & check every thing is tight ?