HoofHearted Posted April 5, 2018 Author Posted April 5, 2018 Not yet. Good idea, i'll be disconnecting the mains and battery tommorow when I do the bell. Quote
al-yeti Posted April 5, 2018 Posted April 5, 2018 Think the enforcer monkeys on extra holidays so keeping you busy until they reply lol Quote
petrolhead Posted April 5, 2018 Posted April 5, 2018 (edited) You sure you dont have anything programmed into the arc settings? Also if the zems, ewd and detection are all powered off the panel you are overloading the power supply. Are they the mains powered zems with their own battery or the small ones? Edited April 5, 2018 by petrolhead Quote
al-yeti Posted April 5, 2018 Posted April 5, 2018 5 minutes ago, petrolhead said: You sure you dont have anything programmed into the arc settings? Ah you see dude turns up and remembers all these terms , arc settings as he says or a Digi mistake somewhere Or reboot might work lol Quote
petrolhead Posted April 5, 2018 Posted April 5, 2018 (edited) Out of interest why would you fit an enforcer when a euro 46 is the more appropriate panel for the job? Pretty sure it says 485 fail when it cant poll a zem, comm fail would be signalling Edited April 5, 2018 by petrolhead Quote
grantc Posted April 5, 2018 Posted April 5, 2018 How many h/w pirs fitted? As above sounds line to much being driven off the panel. Has all detection been successfully walk tested? Voltages at detectors? Quote
al-yeti Posted April 5, 2018 Posted April 5, 2018 2 hours ago, grantc said: How many h/w pirs fitted? As above sounds line to much being driven off the panel. Has all detection been successfully walk tested? Voltages at detectors? For Comms issue? 2 hours ago, petrolhead said: Out of interest why would you fit an enforcer when a euro 46 is the more appropriate panel for the job? Pretty sure it says 485 fail when it cant poll a zem, comm fail would be signalling Come on man , enforcer is more DIY friendly no? When doing wireless though.... Quote
petrolhead Posted April 5, 2018 Posted April 5, 2018 Neither is a diy panel. Doesnt stop arseholes selling them to diyers though. Quote
al-yeti Posted April 5, 2018 Posted April 5, 2018 8 minutes ago, petrolhead said: Neither is a diy panel. Doesnt stop arseholes selling them to diyers though. Diyers fitting this gear hardcore Quote
paul44 Posted April 6, 2018 Posted April 6, 2018 Whoever sold it to you must have a technical helpline. Just call them and have them talk you through it while your at the keypad..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.