al-yeti Posted March 28, 2019 Posted March 28, 2019 (edited) 6 minutes ago, Amps said: Well well well. The cat is out the bag so to speak Nah you to busy installing enforcers to notice I admitted that long time ago lol I been all over Ealing borough working for manufacturers Dowty electronics was good to , they made these nice submarine bouy disposable , just chicken in the sea and ping all over the place , that went to in the end Edited March 28, 2019 by al-yeti Quote
al-yeti Posted March 28, 2019 Posted March 28, 2019 2 minutes ago, Gabs said: Thanks for the replies, a basic design I had for a bell box was this: I would like to think that it has been designed well with encapsulated or even potted electronics, designed for any weather or condition. I could look at making a bell box or shed alarm first? Before trying a full main control panel? At da allot of the soldering got subbed out in the end , was prepared there and then as we say the "aunties " took them home lol , although they could solder better than the men , You would do the same sub it all out and have lots of agreements in place Oh these alarm gorillas here are really all house bashers under cover Quote
Gabs Posted March 28, 2019 Author Posted March 28, 2019 So your alarms were made in house? rather than using separate companies to make them? Quote
Gabs Posted March 28, 2019 Author Posted March 28, 2019 22 minutes ago, MrHappy said: I'd also assume if you had the ability to produce intruder alarm controls you would make a lot more doing something different ? What else could be produced, I can see the main things needed for a panel could be injection moulding facility and a PCB manufacturing machine? Quote
MrHappy Posted March 28, 2019 Posted March 28, 2019 (edited) 19 minutes ago, Gabs said: Thanks for the replies, a basic design I had for a bell box was this: I would like to think that it has been designed well with encapsulated or even potted electronics, designed for any weather or condition. I could look at making a bell box or shed alarm first? Before trying a full main control panel? If I was insane enough to get involved in the manufacture of alarm stuff- Happytronic would import cheap & cheerful tat from the far east, say sounders or lead acid batteries if this proved to be successful the most simple product to start in house manufacture would be an tampered extension speaker, I suspect creating a commercially successfully alarm panel manufacturer from nothing is very hard ... Edited March 28, 2019 by MrHappy Quote Mr Veritas God
Gabs Posted March 28, 2019 Author Posted March 28, 2019 14 minutes ago, MrHappy said: If I was insane enough to get involved in the manufacture of alarm stuff- Happytronic would import cheap & cheerful tat from the far east, say sounders or lead acid batteries if this proved to be successful the most simple product to start in house manufacture would be an tampered extension speaker, I suspect creating a commercially successfully alarm panel manufacturer from nothing is very hard ... Thanks, making things in China would be cheaper, but making stuff here is good too, I am NO Brexiteer, but this it employs people here so that is good, but buying things from there cheaply is good. Yes, it might be hard, although I do want to start a company, could start an eBay business I guess, selling those dummy LED modules. Quote
MrHappy Posted March 28, 2019 Posted March 28, 2019 7 minutes ago, Gabs said: What else could be produced, I can see the main things needed for a panel could be injection moulding facility and a PCB manufacturing machine? Consumer electronics ? or something like a room thermostat is 1/2 the price of 9948 but the development & build cost must be way cheaper An expensive thermostat is about the same cost of commercial controls & keypad but the development cost must be way cheaper & in your warehouse you can fit 20-30 in same space as metal endstation Quote Mr Veritas God
MrHappy Posted March 28, 2019 Posted March 28, 2019 12 minutes ago, Gabs said: Thanks, making things in China would be cheaper, but making stuff here is good too, I am NO Brexiteer, but this it employs people here so that is good, but buying things from there cheaply is good. Yes, it might be hard, although I do want to start a company, could start an eBay business I guess, selling those dummy LED modules. Produce a pp3 power standalone shock sensor like we used to buy in the early 90's Produce commercial controls which network together rather than panels & expanders ? Produce an 8 zone wire panel with onboard keys, which is nice & slim cuase it got a NiMH battery There loads of stuff which could be made, the hard part would be making money Quote Mr Veritas God
al-yeti Posted March 28, 2019 Posted March 28, 2019 56 minutes ago, Gabs said: What else could be produced, I can see the main things needed for a panel could be injection moulding facility and a PCB manufacturing machine? 3d machine? 8 minutes ago, MrHappy said: Produce a pp3 power standalone shock sensor like we used to buy in the early 90's Produce commercial controls which network together rather than panels & expanders ? Produce an 8 zone wire panel with onboard keys, which is nice & slim cuase it got a NiMH battery There loads of stuff which could be made, the hard part would be making money Oddly they can do it with fire I thought and all expensive , no one would buy the panels even though cheap to make would be sold to expensive lol Quote
Gabs Posted March 28, 2019 Author Posted March 28, 2019 11 minutes ago, MrHappy said: Produce a pp3 power standalone shock sensor like we used to buy in the early 90's Produce commercial controls which network together rather than panels & expanders ? Produce an 8 zone wire panel with onboard keys, which is nice & slim cuase it got a NiMH battery There loads of stuff which could be made, the hard part would be making money I agree and even harder getting the money to do it in the first place, only thing I can think is a bank loan? However, if it was successful, it would end very well, for person starting the company and the products being made would be better. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.