mark holland Posted July 13, 2019 Share Posted July 13, 2019 i just got a new pyronix euro 46v10 with a additional keypad i have wired them both together in the same place on the motherboard in the control panel but when i powered up the system the keypads would not let me do anything even the manager code would not work and the alarm went off . also my DIGI-Wifi / xa does not light up . any ideas??? Quote Link to comment Share on other sites More sharing options...
abbz Posted July 14, 2019 Share Posted July 14, 2019 You need to address the keypads then assign the new address as a keypad Quote Link to comment Share on other sites More sharing options...
mark holland Posted July 14, 2019 Author Share Posted July 14, 2019 hi Abbz so your saying you cannot twist the main and the additional keypads wiring together and put in the same place on the board or do you have to programme the main keypad first then add the additional keypad after???? .i have got one of the keypads working now by removing the additional keypad from the control board . but my digi - wifi /xa is still not been recognised in the communication menu on the keypad . will i need to do a clear start and start again ??? ps thanks for your help Quote Link to comment Share on other sites More sharing options...
al-yeti Posted July 14, 2019 Share Posted July 14, 2019 4 hours ago, mark holland said: hi Abbz so your saying you cannot twist the main and the additional keypads wiring together and put in the same place on the board or do you have to programme the main keypad first then add the additional keypad after???? .i have got one of the keypads working now by removing the additional keypad from the control board . but my digi - wifi /xa is still not been recognised in the communication menu on the keypad . will i need to do a clear start and start again ??? ps thanks for your help Wiring can be common Addressing is give a number or letter like a house having a door number or name, so the control panel knows who is who like a postman needs to know what address to goto Not sure about the comes device tho lol I don't use the panel but if you give up I will have it Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 14, 2019 Share Posted July 14, 2019 dont you have to enable the comms device? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
mark holland Posted July 14, 2019 Author Share Posted July 14, 2019 oh ok can you tell me how to enable the comms device using the keypad ??? ps thank you for your reply to my post Quote Link to comment Share on other sites More sharing options...
grantc Posted July 14, 2019 Share Posted July 14, 2019 Your working keypad should be address 0. Got to assign keypads and readers and select keypad address 1. Make this a keypad. Then you have to access a hidden menu on the non working keypad and address it as 1 - Admin - ok to give out this info? That should get the 2nd keypad working. The panel has to be powered up on mains first to recognise the Digi WiFi so it shows in the menu. 1 Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 14, 2019 Share Posted July 14, 2019 Yeah holding key d isn't defaulting info Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
grantc Posted July 15, 2019 Share Posted July 15, 2019 Thanks James. In that case, press and hold D till it says enter security code. Put in 2000. Press no till you get to address and make it 1 Press A to save Keypad should be working. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 15, 2019 Share Posted July 15, 2019 You might need to enable address one in the panel too, always used to but I haven't worked on a euro in years Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.