Jump to content
Security Installer Community

Recommended Posts

Posted (edited)

I'm using the (now frankly ancient, based on some old Intel Atom based ITX board intended for POS applications) Fibaro Home Center 2 (HC 3 must surely be pending, esp. since the Italian takeover)

as I found that the HC Lite was bobbins, although I intend to reuse that as a secondary gateway once the annexe is finished.

 

I have about 40 Fibaro brand devices, mostly dimmers and relays, with a few Qubino where there was no Fibaro equivalent e.g some LED downlights that only supported 0-10v dimming, and a couple of window openers.

 

For door contacts (kept separate from alarm) I've used the flush Aeotec ones, but I do also have a few sensors where the Fibaro 'universal contact', a tiny PCB with flywires, sits neatly hidden behind, it piggybacks

on the sensor and emulates the state of it's contacts via a tiny relay on the board. It's easier to do this on sensors because there is the 12v supply and the space, of course.

 

I've a few fibaro fobs, but find we hardly ever use them. TBF given my experiences with the system, though it is much more stable now, I'd never trust it with smoke alarms let alone intruder!

I've learnt now that if you can do anything with direct association, e.g PIR sensor for hallway lights, do it that way in case the HC blows up. It's also less load on the HC and switching is instant, not the sometimes 1s delay.

 

A lot of the scenes need doing properly, e.g. in code not blocks, but that can wait. 

 

Heres a shot of the HC2 homepage, showing abot half the devices.

Capture.thumb.JPG.0921b7b54488f8555345bb0e88aee133.JPG

 

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Posted
29 minutes ago, datadiffusion said:

I'm using the (now frankly ancient, based on some old Intel Atom based ITX board intended for POS applications) Fibaro Home Center 2 (HC 3 must surely be pending, esp. since the Italian takeover)

as I found that the HC Lite was bobbins, although I intend to reuse that as a secondary gateway once the annexe is finished.

 

I have about 40 Fibaro brand devices, mostly dimmers and relays, with a few Qubino where there was no Fibaro equivalent e.g some LED downlights that only supported 0-10v dimming, and a couple of window openers.

 

For door contacts (kept separate from alarm) I've used the flush Aeotec ones, but I do also have a few sensors where the Fibaro 'universal contact', a tiny PCB with flywires, sits neatly hidden behind, it piggybacks

on the sensor and emulates the state of it's contacts via a tiny relay on the board. It's easier to do this on sensors because there is the 12v supply and the space, of course.

 

I've a few fibaro fobs, but find we hardly ever use them. TBF given my experiences with the system, though it is much more stable now, I'd never trust it with smoke alarms let alone intruder!

I've learnt now that if you can do anything with direct association, e.g PIR sensor for hallway lights, do it that way in case the HC blows up. It's also less load on the HC and switching is instant, not the sometimes 1s delay.

 

A lot of the scenes need doing properly, e.g. in code not blocks, but that can wait. 

 

Heres a shot of the HC2 homepage, showing abot half the devices.

Capture.thumb.JPG.0921b7b54488f8555345bb0e88aee133.JPG

 

Why there sensor on bidet

  • 4 months later...
Posted
3 minutes ago, norman said:

Yeah I have the temporary Blink things on the show too, nifty.

Can Alexa order from Gregg's ?

Posted
22 minutes ago, al-yeti said:

Can Alexa order from Gregg's ?

 

21 minutes ago, norman said:

Just checking now...

 

sadly no

LOL!

I new it worked with Blink but I was unable to get it to work with Dahua, Im pleased with the work around

Posted

I genuinely looked for the alexa skill, maybe through delivaroo etc. 

Nothing is foolproof to a sufficiently talented fool.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.