fresh57 Posted December 30, 2019 Share Posted December 30, 2019 Hi I currently have a Texecom Premier 48 which I connected a Menvier SD-GSM to approx 12 months ago, I connected this to the outputs so that I could tell which zone had activated - took quite a bit of fiddling with but I got there in the end and all worked well. I also set one of the outputs so that I received a text when the house was in "entry". I noticed that randomly (every couple of months) the texts stopped sending and would only work again after I powered the SD-GSM off and on again - not ideal! This happened again recently and after I restarted the SD-GSM again it wouldn't work any more the LCD display has bits of character missing and the mobile numbers have strange characters in them so I guess its for the bin. My question is which GSM dialler would anyone recommend? I dont want to spend a fortune really. The ones I have in mind are the GJD710 and I have also seen at a local supplier a TELL Pager4 Pro 3G.IN6.R1 It needs to be GSM as I don't have a landline Any advice would be appreciated Many Thanks Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 30, 2019 Share Posted December 30, 2019 How many inputs you need? Quote Link to comment Share on other sites More sharing options...
fresh57 Posted December 30, 2019 Author Share Posted December 30, 2019 It would be good to have 8 but it doesn't look like there is much out there except the Menvier ones so I suppose 3 would do. 1 for alarm, 1 entry and 1 exit! Quote Link to comment Share on other sites More sharing options...
grantc Posted December 30, 2019 Share Posted December 30, 2019 Pyronix V2 GSM Pretty sure I have one I'd sell if you're interested. Grant Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 30, 2019 Share Posted December 30, 2019 1 hour ago, fresh57 said: It would be good to have 8 but it doesn't look like there is much out there except the Menvier ones so I suppose 3 would do. 1 for alarm, 1 entry and 1 exit! Go to advent controls online they have one that will do for you Forget the V2 Tel , it's far to complicated for what you want to do and will make your life difficult Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted December 30, 2019 Share Posted December 30, 2019 Why not one of the Texecom modules designed for the Premier? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 30, 2019 Share Posted December 30, 2019 10 minutes ago, sixwheeledbeast said: Why not one of the Texecom modules designed for the Premier? Does it work on all versions? Quote Link to comment Share on other sites More sharing options...
fresh57 Posted December 30, 2019 Author Share Posted December 30, 2019 26 minutes ago, sixwheeledbeast said: Why not one of the Texecom modules designed for the Premier? I looked at those but they look a bit confusing, looks like it would be ok if I had the Premier Elite but unfortunately I havent! Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted December 30, 2019 Share Posted December 30, 2019 Yep they where available Pre-Elite, just uses a COM Port and programs off the keypad. Quote Link to comment Share on other sites More sharing options...
fresh57 Posted December 30, 2019 Author Share Posted December 30, 2019 1 minute ago, sixwheeledbeast said: Yep they where available Pre-Elite, just uses a COM Port and programs off the keypad. What was the module called? Sounds like what I'm after Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.