Hillbilly Posted January 3, 2020 Posted January 3, 2020 I have been a Risco installer until the past year where we moved to Orisec. just to see if any installers have moved and why to another panel? Quote
datadiffusion Posted January 3, 2020 Posted January 3, 2020 Not really much to move to these days, bet any moving these days would be circular! e.g. used to use Texe ten years ago, tried Pyronix, moved back to Texe, etc... What made you ditch Risco, although it has a bad rep I guess it is technically stable, just a bit esoteric? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
al-yeti Posted January 3, 2020 Posted January 3, 2020 20 minutes ago, Hillbilly said: I have been a Risco installer until the past year where we moved to Orisec. just to see if any installers have moved and why to another panel? Strange move lol So more or less the same Quote
Hillbilly Posted January 3, 2020 Author Posted January 3, 2020 Tbh I have just applied for trade side and although been on here for the past 15 years just saw you need to make 5 posts lol. Anyway installed Risco for 18 years through my apprenticeship and the 350 to 800 panels were good hardwired kit. The 595/600/601 kit were decent then Agility/ lightsys brought out.... don’t get me wrong they are decent panels but why make it so complicated for the users to use? plus the engineer programme is nonesense! So the pyronix rep came round and I liked the enforcer. Have quite a few installed and it’s a decent panel only for call outs to the bell tamper switch going faulty! I wanted to use Texecom but they are 3rd party distribution up here so it’s Orisec and it’s the best manufacturers I’ve worked with. Quote
james.wilson Posted January 3, 2020 Posted January 3, 2020 No logon I think the castle panels were good. We stopped using them circa 2000 due to huge reliability issues but the theory of the panel was fantastic. There was so much to like about it but that was 20 years ago now. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
MrHappy Posted January 3, 2020 Posted January 3, 2020 33 minutes ago, Hillbilly said: I wanted to use Texecom but they are 3rd party distribution up here so it’s Orisec and it’s the best manufacturers I’ve worked with. They've retweeted every orisec product ever fitted by everyone & their dog, They've even retweeted your dog Quote Mr Veritas God
james.wilson Posted January 3, 2020 Posted January 3, 2020 It might be your favorite panel but if you had a 'proper' panel you may think differently. My issue is you advise people to get an x when all you know is x. Like I've said Imo spc is the most flexible panel I've worked with, gal 520 close, menvier 2500 was a powerhouse, big premiers are too. Windsors I liked but hard to program supporting over the phone, hkc has unbeatable wireless Imo etc etc. If all I knew about motorsport was lawnmowers racing I'd probably recommend husqvana as better than a Merc or a redbull. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
MrHappy Posted January 3, 2020 Posted January 3, 2020 (edited) 34 minutes ago, Logan said: Menvier 2500 i like. (Its what our local alarm company used to install) most of the panels you mention require a computer to program the panel with a app like wintex for texecom premiere panels. Im used to basic program using keypad panels the only thing which requires a pc on premier is the editing of the sia codes Edited January 3, 2020 by MrHappy Quote Mr Veritas God
Hillbilly Posted January 3, 2020 Author Posted January 3, 2020 50 minutes ago, MrHappy said: They've retweeted every orisec product ever fitted by everyone & their dog, They've even retweeted your dog So can I get into trade access then please? Quote
MrHappy Posted January 3, 2020 Posted January 3, 2020 6 minutes ago, Hillbilly said: So can I get into trade access then please? ? https://www.thesecurityinstaller.co.uk/community/forum/37-trade-access-control/ your "trade full memeber" should let you view & post in the above link ? 1 Quote Mr Veritas God
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.