Gardtec repair or replace

[al-yeti]

On 18/02/2020 at 11:18, datadiffusion said:

What's the nature of the medical problem?

?

[datadiffusion]

Ah just in case no-one thinks it's true...

 

https://www.riscogroup.com/uk/products/product/3937

 

However, the reason I didn't realise is that this is a bit hidden.

 

If you go into Risco (UK) website, as I did a few months back when I thought E aton weren't ever going to deliver V6 software, you get told they do Lightsys, Agility and Prosys only.

 

https://www.riscogroup.com/uk/content/professional-solutions-2

Edited February 22, 2020 by datadiffusion

[kwc]

You need to test charge output with the battery connected, problably just the battery.

 

[james.wilson]

1 hour ago, kwc said:

You need to test charge output with the battery connected, problably just the battery.

 

i doubt its a smart charger on that age of panel, id expect to see >13.8v 

[datadiffusion]

I agree I don't think it's floating at 6V just because there is no battery

[al-yeti]

1 minute ago, datadiffusion said:

I agree I don't think it's floating at 6V just because there is no battery

You float Dr d?

[datadiffusion]

no need armbands 

[kwc]

One last thing to confirm panel is faulty, down power and then repower panel. remove all power output loads  eg pir power and bell power just incase they are dragging it down