james.wilson Posted April 20, 2020 Posted April 20, 2020 Don't forget you need headroom to recharge the battery after a mains fail and consider standby time. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
CR Alarms Posted April 21, 2020 Author Posted April 21, 2020 What do you mean exactly? The battery is the correct size for the panel (7ah), my system is not that loaded its 240ma in standby and 840ma in alarm. Cheers Quote
james.wilson Posted April 21, 2020 Posted April 21, 2020 Oh ok 240 is fine I wouldn't personally go above 75 percent on alarm so I'd either put a psu in or scb more sounders Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
CR Alarms Posted April 21, 2020 Author Posted April 21, 2020 Thanks, worst case i will scb both external sounders, do you think it would work in reality? The elm300 i intend add will draw 80ma max but i imagine once its onboard batteries are fully charged it will be even less than that. Did you ever use these panels? If so can you remember what the hold off circuit is rated at? Cheers Quote
al-yeti Posted April 21, 2020 Posted April 21, 2020 5 hours ago, CR Alarms said: Thanks, worst case i will scb both external sounders, do you think it would work in reality? The elm300 i intend add will draw 80ma max but i imagine once its onboard batteries are fully charged it will be even less than that. Did you ever use these panels? If so can you remember what the hold off circuit is rated at? Cheers SCB both , no one listens to them outside much Your better off making sure internal Sounders are adequate and signalling Quote
CR Alarms Posted April 21, 2020 Author Posted April 21, 2020 You do have a point tbh, i rarely see anyone take any notice of a bell box sounding, the internal sounder i have at the moment is the elmdene speaker which is Loud but not quite loud enough to drive you out house hence why i bought the elm300 give the sound a boost indoors. Just one more thing regarding the panel power supply, does each 12v output such as the bell circuit have its own individual polyswitch?, if so what are they rated at? Or are all the 12v outputs commoned together and protected by one big polyfuse rated at 1250ma at 20 degrees and at worst case 800ma at 40 degrees? Cheers Quote
james.wilson Posted April 21, 2020 Posted April 21, 2020 No I've never used scanny Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
james.wilson Posted April 21, 2020 Posted April 21, 2020 3 minutes ago, Logan said: Yes im well familiar with the 9600 strange panel as the 9800 came out later with 2 7 segment led displays like the 9100 ,which is scantronics first panel Launched because the market demanded a lower cost Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
james.wilson Posted April 21, 2020 Posted April 21, 2020 1 minute ago, Logan said: Brexit? A long time ago Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.