Jump to content
Security Installer Community

Gardtec 580 Tamper reset problem


Recommended Posts

Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

Link to comment
Share on other sites

1 hour ago, paulbaker1954 said:

Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

Javed of all trades best leave it alone 

Link to comment
Share on other sites

2 hours ago, paulbaker1954 said:

Hi

Javing issue resetting after changing batteries in 2 wireless shock detectors (Risco units). Tamper reset is set to any code for sure, in fact all resets are set to any code. I have tried turning both unis off and then adding them back but the alarm will not reset.

 

To reset I am entering main code, saying yes to set but all to no avail. I have checked the tamper springs etc in the sensors etc but the thing just does not want to reset

 

If I remove all power (including backup battery) will this force a reset (I am guessing so)

 

Any other ideas anyone?

Seriously tho, these are a proper pain , all the risco stuff is on resetting tampers , annoying 

 

But you sure all batteries are good ? And you closed them correctly ?

 

Last one I found was a sensor the customer didn't know they had (smoke alarm) 

Link to comment
Share on other sites

4 hours ago, paulbaker1954 said:

Any other ideas anyone?

 

rip it out & stamp on it?

 

its 1 way radio, wait for the device to sleep then wake the transmitter with a 12hr alarm or view the device strengh

  • Upvote 3

Mr th2.jpg Veritas God

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.