james.wilson Posted April 13, 2020 Posted April 13, 2020 Project for today etc using solonoid valve and 10mm plastic speed fit fished in 1 Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
norman Posted April 13, 2020 Posted April 13, 2020 (edited) Lol I've just been doing a pir activated motorised valve jobby, issue with the solenoids are hammer when they are activated. Edited April 13, 2020 by norman 1 Quote Nothing is foolproof to a sufficiently talented fool.
james.wilson Posted April 13, 2020 Author Posted April 13, 2020 would i be better of with a motorised one then? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
norman Posted April 13, 2020 Posted April 13, 2020 Solenoids are OK and cost effective but they shut the water off suddenly and this has potential to exaggerate any weak points, tbh for 10mm I doubt it'll be an issue. I've used these with the manual override due to the application, cheap and cheerful. https://solenoid-valve.world/product/820/connexion/12-electrically-actuated-ball-valve-9-24vacdc-or-110-240vac-abvm04s Quote Nothing is foolproof to a sufficiently talented fool.
sixwheeledbeast Posted April 13, 2020 Posted April 13, 2020 Wouldn't speedfit stuff suffer from fatigue being outside? Quote
MrHappy Posted April 13, 2020 Posted April 13, 2020 & get tabs ends all over the lawn ? 1 Quote Mr Veritas God
norman Posted April 13, 2020 Posted April 13, 2020 56 minutes ago, sixwheeledbeast said: Wouldn't speedfit stuff suffer from fatigue being outside? Gets brittle but lots of pubs use it? Guessing maybe uv rated but probably not due to it not being critical? Quote Nothing is foolproof to a sufficiently talented fool.
datadiffusion Posted April 13, 2020 Posted April 13, 2020 The Sun uses wordpress? Wow. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
norman Posted April 13, 2020 Posted April 13, 2020 3 hours ago, james.wilson said: Project for today etc using solonoid valve and 10mm plastic speed fit fished in What timer are you using and what voltage is the solenoid? Eta just seen the remote, I have a similar one in the garage, little 12v relay and 2 remotes marked A and B iirc, bang good special. Quote Nothing is foolproof to a sufficiently talented fool.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.