xpertalarms Posted May 21, 2020 Posted May 21, 2020 Got a galaxy dimension that activates fine on all groups apart from one group...sounders assigned to that group don't activate but comms goes through fine. Had a look at all the group parameters and output programming but can't see anything out of the blue. Any suggestions? Thanks Quote
al-yeti Posted May 21, 2020 Posted May 21, 2020 36 minutes ago, xpertalarms said: Got a galaxy dimension that activates fine on all groups apart from one group...sounders assigned to that group don't activate but comms goes through fine. Had a look at all the group parameters and output programming but can't see anything out of the blue. Any suggestions? Thanks How is the setup? How many groups and all Sounders seperated to each group? Or you saying common sounder doesn't activate or output only for that group doesn't activate 3 minutes ago, Logan said: I only know galaxy 60 unfortunately Come on Logan you don't know the galaxy 60 ? Quote
xpertalarms Posted May 21, 2020 Author Posted May 21, 2020 (edited) The setup has 1 building with 2 groups, and 1 building with 1 group. The building with 1 group is seperate to the main building, with the exception that the keypad in the main building is assigned to all groups. Sounders are seperated per group. Edited May 21, 2020 by xpertalarms Quote
al-yeti Posted May 21, 2020 Posted May 21, 2020 Hmmm need expert nova? SW? You sure you wired it up correctly? And assigned correct output to that group? Easily missed if not your regular panel Quote
xpertalarms Posted May 21, 2020 Author Posted May 21, 2020 Yep all wired correctly, correct outputs assigned. I've done an output test too and that's all fine. Very strange..... Quote
al-yeti Posted May 21, 2020 Posted May 21, 2020 38 minutes ago, xpertalarms said: Yep all wired correctly, correct outputs assigned. I've done an output test too and that's all fine. Very strange..... So your saying only alarm.condition fails to trigger out put? Quote
Nova-Security Posted May 21, 2020 Posted May 21, 2020 If the outputs are assigned correctly for that area have you got a bell delay programmed What does not sound e/e or alarm tones ? Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name.
xpertalarms Posted May 21, 2020 Author Posted May 21, 2020 No bell delay programmed, ee tones are fine on both the keypad and ee horn for that group, but neither of them sound during alarm and the bells output type doesn't either Quote
james.wilson Posted May 21, 2020 Posted May 21, 2020 51 17 Id go for a restart first how is the output programmed ie group * modifier etc Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.