Sdgservices Posted June 10, 2020 Posted June 10, 2020 Hi, Looking for some advice regarding an SL dialler thats connected to our alarm system. Stopped resetting when switched mobile phones. Dialler reset perfectly fine before we switched from iPhones to android. The engineer has also tried to reset with landline but still no joy. Will only reset with iphone, not with a samsung phone, strange?? Any feedback/solution would be much appreciated. Thanks in advance. Quote
PeterJames Posted June 10, 2020 Posted June 10, 2020 Do you reset pressing 5 or hash or similar ? it will be looking for a DTMF tone in which case it should not matter what phone you use. Unless the keys dont transmit DTMF while in a call Quote
james.wilson Posted June 10, 2020 Posted June 10, 2020 i recall this happing many years ago with orange. when you switched phones did you switch networks? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
datadiffusion Posted June 10, 2020 Posted June 10, 2020 Just had a Menvier SD3 GSM dialler go runaway on me, lucky there was only ten quid left on the SIM (customers responsibility) still haven't quite worked out what happened as no alarm externally or other alarm event and fine after reset. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
al-yeti Posted June 10, 2020 Posted June 10, 2020 16 hours ago, Sdgservices said: Hi, Looking for some advice regarding an SL dialler thats connected to our alarm system. Stopped resetting when switched mobile phones. Dialler reset perfectly fine before we switched from iPhones to android. The engineer has also tried to reset with landline but still no joy. Will only reset with iphone, not with a samsung phone, strange?? Any feedback/solution would be much appreciated. Thanks in advance. Op sleeping? Need more info, what you mean resetting? Quote
james.wilson Posted June 10, 2020 Posted June 10, 2020 23 minutes ago, al-yeti said: Need more info, what you mean resetting? clearing the call down id say Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
sixwheeledbeast Posted June 10, 2020 Posted June 10, 2020 I can only assume clearing the call too, but as the post wasn't clear and there wasn't a direct question, I didn't see any point in guessing what the OP meant. Quote
Sdgservices Posted June 11, 2020 Author Posted June 11, 2020 Sorry people for the late reply, working night shift Yes Mr Happy that's similar to the one I have. When I say resetting I mean cancel the alarm after a trigger, this is usually completed with a short message, then pressing *, followed by an acceptance tone to know its cancelled, hope that makes sense. When switching phones was still on the same network, EE. Quote
sixwheeledbeast Posted June 11, 2020 Posted June 11, 2020 You said that you can't clear down if it calls a landline, I would be starting to diagnose from there to make sure that is correct. I have known some devices not to sent DTMF while in a call, you have to go to another menu or need some third party app to enable this. If it requires an app this may have it's own controls in settings or require your volume to be higher, will difffer from device to device. Making sure landline to landline (or even the old Iphone) works first would rule out a fault elsewhere. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.