al-yeti Posted July 5, 2020 Posted July 5, 2020 3 minutes ago, Yassine said: I'm trying now with Power Supply 12V DC 12v ----------------------------> 12V+ 0V ------------------------------> - and from control panel I wired Siren Control panel Bell ----------------------------> GND STRB ------------------------> GND nothing happened when I trigger the siren from control panel or PIR trigger Where did you get bell? Is bell tamper closed? Does bell have jumpers you can take picture of Actually I see the jumpers Quote
Yassine Posted July 5, 2020 Author Posted July 5, 2020 2 minutes ago, al-yeti said: Where did you get bell? Is bell tamper closed? Does bell have jumpers you can take picture of Quote
al-yeti Posted July 5, 2020 Posted July 5, 2020 (edited) Turn battery on And put on SCB mode Edited July 5, 2020 by al-yeti Quote
Yassine Posted July 5, 2020 Author Posted July 5, 2020 2 minutes ago, al-yeti said: Turn battery on Turned on but still the same When I wire the siren with 12v and 0V from control panel or from Power Supply 12V DC it make sound and the green light flashing and than stop wait for trigger from control panel I tested with mini siren that is work with audio jack (Siren+ , Siren -) it is working normally when there is trigger something in the linking I have did from control panel to siren is wrong Quote
sixwheeledbeast Posted July 5, 2020 Posted July 5, 2020 They have an engineer hold off mode and will not be full operation with the lid open. Quote
PeterJames Posted July 5, 2020 Posted July 5, 2020 If you use a power supply you have to common up the ov Quote
Yassine Posted July 5, 2020 Author Posted July 5, 2020 17 minutes ago, sixwheeledbeast said: They have an engineer hold off mode and will not be full operation with the lid open. I Put jack in off for LC stay the same 17 minutes ago, PeterJames said: If you use a power supply you have to common up the ov Quote
Yassine Posted July 5, 2020 Author Posted July 5, 2020 21 minutes ago, PeterJames said: I give up Thank you for your help Quote
PeterJames Posted July 5, 2020 Posted July 5, 2020 1 minute ago, Yassine said: Thank you for your help Dont take this the wrong way but you need to get some basic electronics knowledge before you start playing around with stuff you dont understand. I gave up because you dont have any idea of what people are trying to explain. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.