Help please

[scotslad469]

Hi all hoping someone on here can help and save me trying to get someone to fix this. We have had a new kitchen installed and the fitters cracked the sensor off the wall and ive got a new one can someone help me ?? which wires go where on the new one ?

 

The sensor on the left is the old one and the sensor on the right is the new one Pyronix KX10DP. Do i need a different PIR sensor ???

 

Any help would be greatly appreciated 

 

Gavin

[sixwheeledbeast]

NC/C == Alarm

T/T == Tamper

[scotslad469]

Lets pretend im stupid  

 

What colour wires go into the pyronix terminals ??

 

And since ive cut the old one off now the panel is saying AUX DC fail ?? Am i better getting a pro into look at it ?

 

[sixwheeledbeast]

It depends what colour wires the installer used there is no standard. You have also likely blown a fuse.

If your struggling to copy the "colours" from my post above your probably better getting someone in. Is the kitchen fitter paying?

[scotslad469]

The kitchen fitter is a friend of a friend so its down to me to pay for it all . The PIR cost £20 i could change it for something similar in spec ? the picture below is the alarm box i took the cover off it 

[al-yeti]

38 minutes ago, scotslad469 said:

Hi all hoping someone on here can help and save me trying to get someone to fix this. We have had a new kitchen installed and the fitters cracked the sensor off the wall and ive got a new one can someone help me ?? which wires go where on the new one ?

 

The sensor on the left is the old one and the sensor on the right is the new one Pyronix KX10DP. Do i need a different PIR sensor ???

 

Any help would be greatly appreciated 

 

Gavin

White and green to tamper terminals

 

Blue and yellow to alarm

Black is minus -

Red is positive +

18 minutes ago, scotslad469 said:

Lets pretend im stupid  

 

What colour wires go into the pyronix terminals ??

 

And since ive cut the old one off now the panel is saying AUX DC fail ?? Am i better getting a pro into look at it ?

 

Aux DC fail because probably short it out 

[scotslad469]

2 minutes ago, al-yeti said:

White and green to tamper terminals

 

Blue and yellow to alarm

Black is minus -

Red is positive +

Aux DC fail because probably short it out 

On the new PIR it has two connectors for Alarm and tamper one each with EOL above them what colour in the EOL screw 

 

+ Red

- Black

Alarm EOL ?

Alarm ?

Tamper ?

Tamper EOL ? 
 

thanks for all the help and patience and yes the glass fuse is blown I will replace it 

[al-yeti]

56 minutes ago, scotslad469 said:

On the new PIR it has two connectors for Alarm and tamper one each with EOL above them what colour in the EOL screw 

 

+ Red

- Black

Alarm EOL ?

Alarm ?

Tamper ?

Tamper EOL ? 
 

thanks for all the help and patience and yes the glass fuse is blown I will replace it 

Same as what I just said

 

 

And ignore eol and don't put jumpers on them

[scotslad469]

So don’t put any cables in the EOL screws ? 

[al-yeti]

53 minutes ago, scotslad469 said:

So don’t put any cables in the EOL screws ? 

Ignore the word eol and follow what I said