How can I install 16 Poe cameras on 140m/460ft distance?

[netkey11]

Hallo I want to install 16 POE cameras. The distance between POE cameras and POE NVR is 140m/460ft.

Can i put my 16 channel POE Switch in the middle of the distance ( POE Switch insted of POE Extender), and then from the POE switch to the Router with just 1 Cable.

Or do you have better idea?

 

[sixwheeledbeast]

Ethernet is 100m max normally for an installation 90m field wiring with 10m left for patching.

You then also need to consider the load types and how much your switch provides.

[PeterJames]

Unless you use Dahua EPOE 

[sixwheeledbeast]

There are other brands of kit that offer longer ranges but it's not Ethernet they normally have some "CCTV mode", like above.

[al-yeti]

9 hours ago, PeterJames said:

Unless you use Dahua EPOE 

There's nothing special your showing here with repeaters and coax lol

[PeterJames]

11 hours ago, al-yeti said:

There's nothing special your showing here with repeaters and coax lol

the bit your looking at is traditional there are no epoe cams?

Below the top camera is not poe, the three below that are epoe, all of em will do what the op wants 

[al-yeti]

13 hours ago, PeterJames said:

the bit your looking at is traditional there are no epoe cams?

Below the top camera is not poe, the three below that are epoe, all of em will do what the op wants 

Ok but nothing others can't do right ? 

[PeterJames]

I dont know about others the epoe does what the op asked, which was my answer to the question 

[al-yeti]

Just now, PeterJames said:

I dont know about others the epoe does what the op asked, which was my answer to the question 

Ok I get you 

 

So upto 800m no device in-between?

[PeterJames]

 

5 hours ago, al-yeti said:

Ok I get you 

 

So upto 800m no device in-between?

yep

over 1k if you put coax in the middle not that Ive tried it