Euro 46 psu battery fault

[james.wilson]

Yeah I've changed a tyre on a xj220 too. 

However on the euro have you checked the fuse on the battery. It does look like a board issue though. Bear in mind the euro does sense battery volts and demand and adjusts charging accordingly 

[al-yeti]

4 hours ago, Mark Rider said:

well i have a battery tester and have tested it like i said and its ok 

 No wonder people dont use professionals as there all as arrogant as you.

as i said i have all the tools just wanted some advice as not fully up to speed on alarms 

as i work on 800v Porsche Taycans

So then you know how to fix , as no point using professionals lol

 

Anyhow what he said above is correct , you call it arrogance but it's forum banter , arrogance is your reply 

 

Follow through the detailed help from Mr H and think about what jw just said 

 

Then go back to your Porsche vehicles , while I work on some Toyota hybrids all the same to me......

Edited November 8, 2020 by al-yeti

[Amps]

6 hours ago, Mark Rider said:

 

as i said i have all the tools just wanted some advice as not fully up to speed on alarms 

 

How/where did you manage to download the Pyronix insite software!

[MrHappy]

8 hours ago, Mark Rider said:

well i have a battery tester and have tested it like i said and its ok

 

act ?

 

 

 

8 hours ago, Mark Rider said:

No wonder people dont use professionals as there all as arrogant as you.

 

Me? I told you who to mend your alarm for nowt

 

Battery, fuse or PCB

 

8 hours ago, Mark Rider said:

800v Porsche Taycans

 

 

impressive.... however there'll be much cheaper & much less powerful than a big wagon

 

 

they appear to do electric ones if you lack diesel skills

 

 

 

[Mark Rider]

3 hours ago, Amps said:

How/where did you manage to download the Pyronix insite software!

From there website . It's good bit of software.

[al-yeti]

3 hours ago, Amps said:

How/where did you manage to download the Pyronix insite software!

They don't exactly make it hard to get dude , just like wintex etc 

 

All aimed at DIY trying to show they trade lol

[Mark Rider]

5 hours ago, Amps said:

 

So new battery fitted and still the same 

Same faults 

 Also with the power off you can't do a start with just the battery doesn't seem to do anything at all. 

 So looks like it's the panel 

 

So question the V10 is the layout much the same on the panel ? 

 

[al-yeti]

14 minutes ago, Mark Rider said:

 

 So looks like it's the panel 

 

So question the V10 is the layout much the same on the panel ? 

 

Or battery which damaged the panel or something else that did it 

[MrHappy]

1 hour ago, Mark Rider said:

 Also with the power off you can't do a start with just the battery doesn't seem to do anything at all. 

 So looks like it's the panel 

 

IIRC needs mains to start,

 

Power it down

Remove the modem connection,

Rainbow ribbon if fitted

bell +

Speaker+

Zem +

Aux + on both tiers of the pcb terminals

 

Check all the pcb fuses with DVM on buzz (replace any blown one with correct value)

 

Restart with just the RKP on it, if won't change onto the battery its deffo shagged

 

1 hour ago, Mark Rider said:

So question the V10 is the layout much the same on the panel ? 

 

 

think its the same pcb, but but minor sorfware changes which includes app support ?

[Mark Rider]

2 hours ago, MrHappy said:

 

IIRC needs mains to start,

 

Power it down

Remove the modem connection,

Rainbow ribbon if fitted

bell +

Speaker+

Zem +

Aux + on both tiers of the pcb terminals

 

Check all the pcb fuses with DVM on buzz (replace any blown one with correct value)

 

Restart with just the RKP on it, if won't change onto the battery its deffo shagged

 

 

think its the same pcb, but but minor sorfware changes which includes app support ?

Ok will do see what happens thanks I let you know