Roller shutter contact, do I use tamper wires ?

[Keef]

I want to add this contact to my garage door but I am not 100% sure about the wiring

It has,

2 white wires - reed switch

2 red wires - tamper

I know how to wire the white wires via EOL, but do I need to use the tamper wires as well, or is it not necessary ?

I was thinking

1k across the white wires

Zone common in to white wire

other white wire to red

other red to zone return with 1k

 

Thanks for reading, hope it makes sense 

 

[MrHappy]

Edited March 7, 2021 by MrHappy

[al-yeti]

39 minutes ago, Keef said:

I want to add this contact to my garage door but I am not 100% sure about the wiring

It has,

2 white wires - reed switch

2 red wires - tamper

I know how to wire the white wires via EOL, but do I need to use the tamper wires as well, or is it not necessary ?

I was thinking

1k across the white wires

Zone common in to white wire

other white wire to red

other red to zone return with 1k

 

Thanks for reading, hope it makes sense 

 

So you need the tamper proof box and the grommet should fit on it aswell and do as Mr H says or he send the boys round 

[Keef]

Thank you MrHappy, thats how I thought

 

Just so I have this right in my head.

If I only used the white wires and someone cut the metal cable, it would cause a open circuit.

Using the red as well, it will cause a tamper ?

 

Keef

[Keef]

3 minutes ago, al-yeti said:

So you need the tamper proof box and the grommet should fit on it aswell and do as Mr H says or he send the boys round 

Yes sir ;-)

[MrHappy]

 

 

cutting the sleeve when the system is unset, will do nowt

 

cutting the sleeve well the system is armed will produce an alarm

[sixwheeledbeast]

Short answer is yes.

Bear in mind Mr H's helpful diagram doesn't include the JB tamper which would go in series, much like the red pair does.

Something like a J81 or I prefer JB707 would be suitable for connections.

[MrHappy]

I toyed with drawing it with a JB727

[Keef]

Thanks for all the help, but I don’t think even you lot could solve this !!! 

I had this great idea to bury the cable going to the garage while I was doing the footing for a patio. Buried it under 6 inches of hardcore and concrete, then paved the whole thing.

Just gone to connect the wires and found out I have used phone cable by mistake, knew I should have use conduit

[MrHappy]

26 minutes ago, Keef said:

Just gone to connect the wires and found out I have used phone cable by mistake, knew I should have use conduit

 

sorted....