Sparkypenguin Posted August 4, 2021 Author Posted August 4, 2021 I've decided to buy and test a flush mounted contact to see if I can fit into the frames. Probably an Elm-6QFC(RD) and/or RFT-RD as the metered tails on the pre wired one may be too short. Quote
MrHappy Posted August 4, 2021 Posted August 4, 2021 21 minutes ago, Sparkypenguin said: I've decided to buy and test a flush mounted contact to see if I can fit into the frames. Probably an Elm-6QFC(RD) and/or RFT-RD as the metered tails on the pre wired one may be too short. look very carefully how big a gap you have between frame & door to fit the top of the nylon contact in place the stainless steel capped ones are thinner & more robust if they rub together Quote Mr Veritas God
sixwheeledbeast Posted August 4, 2021 Posted August 4, 2021 I try to avoid flush on external in case of moisture. If I have to sealed type to a JB would be my preferred. Quote
Sparkypenguin Posted August 4, 2021 Author Posted August 4, 2021 Thanks for advice MrH and SWB. I quite like the idea of the multi resistor ones. Can I ask if Knight, Elmdene and CQR are all decent makes? Quote
MrHappy Posted August 4, 2021 Posted August 4, 2021 There the 3 leading brands of non powered detection... However I assume non of them make the glass reeds ? Quote Mr Veritas God
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.