Stable_Boy Posted December 15, 2021 Share Posted December 15, 2021 30 odd years ago I fitted an alarm panel at the stables where we kept our daughters pony, as fate would have it she is now got her daughters pony on the same yard. The lady who still owns it is now in her mid 80's & struggling with seeing the keypad to put in the code so I'm after advice on a replacement panel that uses fobs. It doesn't have to be anything special it has 6 zones, including entry/exit, it has a couple of Honeywell AG6's attached, doesn't have a communicator, but the new one needs to use cards/fobs so the keypad doesn't have to be used. Thanks in advance Alan.. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted December 15, 2021 Share Posted December 15, 2021 Most decent panels have prox on them now, or if low security and panel supports keyswitch you could add an access fob reader. Or upgrade to rf etc Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted December 15, 2021 Share Posted December 15, 2021 Any commercial grade panel needs to support keypads with fobs to conform with police signalling requirements. You may find they are a bit more complex to program than your basic Optima etc. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted December 16, 2021 Share Posted December 16, 2021 13 hours ago, Stable_Boy said: 30 odd years ago I fitted an alarm panel at the stables where we kept our daughters pony, as fate would have it she is now got her daughters pony on the same yard. The lady who still owns it is now in her mid 80's & struggling with seeing the keypad to put in the code so I'm after advice on a replacement panel that uses fobs. It doesn't have to be anything special it has 6 zones, including entry/exit, it has a couple of Honeywell AG6's attached, doesn't have a communicator, but the new one needs to use cards/fobs so the keypad doesn't have to be used. Thanks in advance Alan.. I would go with anything that also has voice or speech like hkc (although it's trade only at moment( There are.probably others , but if her hearing isn't bad when using fobs she hopefully can hear what it's doing or what an issue is , if one occurred Quote Link to comment Share on other sites More sharing options...
Stable_Boy Posted December 17, 2021 Author Share Posted December 17, 2021 Thanks for all the replies, I have found https://connectec.uk/security/intruder-alarms/wired-alarm-systems/wired-alarm-panels-and-kits/pyronix-euro-46-v10-hybrid-alarm-panel-small which appears to fit the bill, although as someone pointed out there might be more programming to do. Are Pyronix a reasonable panel to work with, it the programming logical, can anybody suggest a different panel. When I went to start this post an advert for Texecom fobs came up, but when I was looking I could find a Texecom panel which advertised using fobs. Alan.. Quote Link to comment Share on other sites More sharing options...
Stable_Boy Posted December 17, 2021 Author Share Posted December 17, 2021 Obviously that should have read "I was looking I couldn't find a Texecom panel which advertised using fobs." I hate getting old, at least the panel isn't at the top of the stairs or I'd never remember the code........ Quote Link to comment Share on other sites More sharing options...
Stable_Boy Posted January 10, 2022 Author Share Posted January 10, 2022 (edited) Okay guys I hope I can still reply on your help, I've now purchased a Texecom Premier 48 panel, with a remote keypad that takes Fobs, both are 2nd hand from Fleecebay, so hopefully they work. I know it's an old board manufacture date 26-12-07 but it should do what she needs. Been a while since I did any alarm work, the pad needs +/- then T/R do you still reverse them at the other end, so T goes to R & vice versa? I can find the manual for the Premier Elite but not just the Premier can anyone help, I am presuming each of the 8 zones has 4 terminals, 2 A & 2 T Active & Tamper? We'll only be using 6 so do I just loop out the other 2? LOL I have just answered my first question, no you don't reverse them well not on this panel at least, it's all still all programmed up, so that's the first fun part Edited January 10, 2022 by Stable_Boy Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted January 10, 2022 Share Posted January 10, 2022 3 minutes ago, Stable_Boy said: do you still reverse them at the other end, so T goes to R & vice versa? That has never been a thing. Elite manual will do for the basics, just don't expect all the features to be on the old panel. Program last two as Not Used Quote Link to comment Share on other sites More sharing options...
Stable_Boy Posted January 10, 2022 Author Share Posted January 10, 2022 (edited) 35 minutes ago, sixwheeledbeast said: That has never been a thing. Thank you for that, I could have sworn when I was subbying for a firm 20 years ago we used a panel which wher the T went to the R & the R to the T, but memory is a funny thing. But now reversed it is talking to the panel & getting lots of errors, just need to learn the programming, assuming I can get into it. Edited January 10, 2022 by Stable_Boy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.