al-yeti Posted November 7, 2022 Posted November 7, 2022 18 minutes ago, Haveagoatanything said: I took this yesterday when I had it open. Pir pictures?
sixwheeledbeast Posted November 7, 2022 Posted November 7, 2022 No global tampers and it looks like a basic panel so only a bell tamper on the whole system In the middle of a ring or radial when it should be on a 3a spur. It's poorly installed so who knows what else will or won't work...
Haveagoatanything Posted November 7, 2022 Author Posted November 7, 2022 1 hour ago, al-yeti said: Pir pictures? I will post these tomorrow
Imnotshankled Posted November 7, 2022 Posted November 7, 2022 (edited) 1 hour ago, Haveagoatanything said: I took this yesterday when I had it open. OK you have a texecom veritas r8 Looking at the wiring none of the zones are linked out and there's nothing wired to the SW out terminal which is good This most likely narrows the fault down th the pir the eol link on captures are a switch set it to OC OC which is the top option Edited November 7, 2022 by Imnotshankled
Imnotshankled Posted November 7, 2022 Posted November 7, 2022 53 minutes ago, sixwheeledbeast said: No global tampers and it looks like a basic panel so only a bell tamper on the whole system In the middle of a ring or radial when it should be on a 3a spur. It's poorly installed so who knows what else will or won't work... Never worked with companies on new builds eh
sixwheeledbeast Posted November 8, 2022 Posted November 8, 2022 Seen plenty of poorly installed stuff from all types of origins... there will always be plenty more.
Imnotshankled Posted November 8, 2022 Posted November 8, 2022 4 minutes ago, sixwheeledbeast said: Seen plenty of poorly installed stuff from all types of origins... there will always be plenty more. This is nothing compared to a premier shop I did recently system was a texecom Premier elite 48 Psu was on a plug Top and panel was wired into a 40a cooker feed with no fcu or earth Bell box had no battery in it All detectors except front door were disabled 2 PA buttons never wired in And Last but not least it had some crappy gsm SD
norman Posted November 8, 2022 Posted November 8, 2022 What was it like before you got there? 1 Nothing is foolproof to a sufficiently talented fool.
sixwheeledbeast Posted November 8, 2022 Posted November 8, 2022 8 hours ago, Imnotshankled said: This is nothing compared to ... How do you know, I didn't expand, safe to say I have seen hundreds more systems in my time... I don't think it's relevant to play who can pee up the wall higher... The OP wants their alarm repairing I have pointed out it's poorly installed. They can investigate why or get someone to fit it properly.
Haveagoatanything Posted November 8, 2022 Author Posted November 8, 2022 Here is the wiring on the P15, plus also the the G2 switch is on and the shutter at the bottom is set to dog. I haven’t moved the EOL setting.
Recommended Posts