Trying to install a hardwired bell for visonic

[Naeem ahmed]

Hi I had a wireless bell but fed up of changing batteries so I bought a new Veritas alarm bell for hardwiring into my visonic powermax complete also bought the correct expander module but finding it hard to connect to the expander I don't know where to connect the strobe and trigger to please can anyone help would be greatfull

 

Kind regards

Naeem

[james.wilson]

if you provide images of the bell and panel connections someone will

[Hugh94]

Here is the wiring diagram for the expander, seems that z29/30 are for the tamper and shows how to wire it, this also shows where to put the strobe and bell cores, power is self explanatory. 

[sixwheeledbeast]

They are a PITA, most of the ones I have seen install by others have no tamper.

Tamper needs a 2k2 resistor in series to zone

12V and GND can only supply 450mA as it says so you need a low current bell.

EXT is -ve trig.

[sixwheeledbeast]

I'd honestly bin most Powermax's now, they are not FFP

[Naeem ahmed]

22 hours ago, Hugh94 said:

Here is the wiring diagram for the expander, seems that z29/30 are for the tamper and shows how to wire it, this also shows where to put the strobe and bell cores, power is self explanatory. 

Hi thankyou all working