al-yeti Posted August 12, 2023 Posted August 12, 2023 On 12/08/2023 at 09:59, MrHappy said: there's ya problem.... I'd assume the fuse on the I/O is unmonitored ? you checked it ?? Expand Enforcer will power the master blaster? Quote
Bad-Yeti Posted August 12, 2023 Author Posted August 12, 2023 On 12/08/2023 at 18:57, al-yeti said: Enforcer will power the master blaster? Expand No, the Master Blaster is powered by a separate 240v feed the siren out is just the relay switch for the blaster. Hail be to the Yeti's Quote
james.wilson Posted August 13, 2023 Posted August 13, 2023 On 12/08/2023 at 18:04, Bad-Yeti said: Aye I guess. So are Pyronix alarms not exactly great? What are a good make? Expand Anything apart from pyronix and risco Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Bad-Yeti Posted August 13, 2023 Author Posted August 13, 2023 On 12/08/2023 at 09:59, MrHappy said: Expand If as has been suggested, I disconnect the battery and do a I guess hard restart will it lose all its settings? Quote
MrHappy Posted August 13, 2023 Posted August 13, 2023 On 12/08/2023 at 18:04, Bad-Yeti said: So are Pyronix alarms not exactly great? Expand Fitted correctly they are bullet proof. On 13/08/2023 at 09:45, Bad-Yeti said: If as has been suggested, I disconnect the battery and do a I guess hard restart will it lose all its settings? Expand If you wish to default use setting - "CLEAN START" from the engineering menu However, lets start with the very basics ? Loosen the 2 screen under the panels back plate so you can hang the front panel underneath. Is the ribbon from l/O pcd fitted correctly? Have you +12v & com on DC voltage with multi meter ? Remove the trigger for MB or EWD & touch it to com your device should sound? Yes = programming issue(s) No= fuse of wiring issues Quote Mr Veritas God
Bad-Yeti Posted August 13, 2023 Author Posted August 13, 2023 (edited) Ok I've discovered the problem there was a short and it had taken out one of the fuses after all is there any way to arm the system as I don't have any fuses and can't get any more until tomorrow. Is it possible to on the system with that fault? I note your comment Mr happy and you don't need to worry I shouldn't be doing any more alarms to be honest with you I didn't even want to do this one in the first place lol. Edited August 13, 2023 by Bad-Yeti Quote
Bad-Yeti Posted August 13, 2023 Author Posted August 13, 2023 Okay, when I tested the siren the output from the I/o is only 2.38 volts for this sound up and 1.85 for the stroke that's with both fuses replaced Quote
MrHappy Posted August 14, 2023 Posted August 14, 2023 On 13/08/2023 at 13:07, Bad-Yeti said: Okay, when I tested the siren the output from the I/o is only 2.38 volts for this sound up and 1.85 for the stroke that's with both fuses replaced Expand between output & 12v ? Quote Mr Veritas God
Bad-Yeti Posted August 14, 2023 Author Posted August 14, 2023 Got it all sorted. Looks like all the advice I got from the supplier was wrong. That the Siren and Strobe are negative switches against the 12v not positive against the common, it damaged the I/O board. Quote
al-yeti Posted August 14, 2023 Posted August 14, 2023 On 14/08/2023 at 15:46, Bad-Yeti said: Got it all sorted. Looks like all the advice I got from the supplier was wrong. That the Siren and Strobe are negative switches against the 12v not positive against the common, it damaged the I/O board. Expand Manual would have been better to use Board is cheap and available Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.