Jump to content
Security Installer Community

Recommended Posts

Posted

Starting to wire up the window zones (as previously discussed). My existing system (see photo below) had resistors across the common pin and zone pin (circled in blue), and a resistor in series with the windows (circled in red). That is because my current system is zone doubling.

 

ZoneResistors.thumb.jpg.1a80dbb393fa12fcad5f5fc2053c6d01.jpg

 

I assume on the new galaxy FX100+ (because I am not planning on zone doubling) I just follow the diagram as previously discussed here in my Previous Post and will only need a single 1k resistor as per the one circled in red above?

 

Hate to keep asking, so please excuse my questions. Once I have my head around this for one zone I will be fine.

 

Posted
  On 26/09/2023 at 09:19, Grego said:

Starting to wire up the window zones (as previously discussed). My existing system (see photo below) had resistors across the common pin and zone pin (circled in blue), and a resistor in series with the windows (circled in red). That is because my current system is zone doubling.

 

ZoneResistors.thumb.jpg.1a80dbb393fa12fcad5f5fc2053c6d01.jpg

 

I assume on the new galaxy FX100+ (because I am not planning on zone doubling) I just follow the diagram as previously discussed here in my Previous Post and will only need a single 1k resistor as per the one circled in red above?

 

Hate to keep asking, so please excuse my questions. Once I have my head around this for one zone I will be fine.

 

Expand  

 

Nice wiring....

Mr th2.jpg Veritas God

Posted
  On 26/09/2023 at 09:19, Grego said:

Starting to wire up the window zones (as previously discussed). My existing system (see photo below) had resistors across the common pin and zone pin (circled in blue), and a resistor in series with the windows (circled in red). That is because my current system is zone doubling.

 

ZoneResistors.thumb.jpg.1a80dbb393fa12fcad5f5fc2053c6d01.jpg

 

I assume on the new galaxy FX100+ (because I am not planning on zone doubling) I just follow the diagram as previously discussed here in my Previous Post and will only need a single 1k resistor as per the one circled in red above?

 

Hate to keep asking, so please excuse my questions. Once I have my head around this for one zone I will be fine.

 

Expand  

Speaker wire?

Posted

I appreciate the professional installers on this forum, and I understand that my situation may seem less than ideal. I want to assure you that I am doing everything I can to improve the current circumstances. This situation is not intentional, and if there were a straightforward solution, I would have implemented it already. However, there are some challenges that will require time and effort to address. Your advice and guidance are valuable to me, and I truly appreciate your support.

 

Thanks, Mark

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.