Logic 4 external bell replacement

[cgjelec]

Hello everyone been working with alarm for around 5 years now. Have had a customer with a logic 4 key operated alarm the customer ripped the old external siren and now wants a new one fitted (texecom odyssey x-be) but I can not for the life of me figure out the connections 

[MrHappy]

Tabd ?

[james.wilson]

I'd need to see them what's the choices.

Never installed a logic4 my dad's era and I'm old but is it neg or pos tamp return? 

[james.wilson]

I should add if they want the outside bit renewed should they not renew everything? 

 

Bearing in mind it's not just the outside bit that makes the outside bit cause the complaints

 

I'm guessing late 80s on the panel? 

 

 

[MrHappy]

12 hours ago, james.wilson said:

I'm guessing late 80s on the panel? 

 

I've got love for you if you where installed in the 80's (80's)....

 

I assume this, but it will 25 years or more since I've seen one ?

 

[james.wilson]

Looks like neg tamp return then

[sixwheeledbeast]

Use the Texecom to ADE instructions in the bell manual?

I replaced an L4 for another must be 15 years ago, was the last one at the wholesalers probably old stock too.

 

[al-yeti]

3 hours ago, MrHappy said:

 

I've got love for you if you where installed in the 80's (80's)....

 

I assume this, but it will 25 years or more since I've seen one ?

 

These should be as easy as any other bell to connect