Rad1o Posted October 4, 2023 Posted October 4, 2023 Hello, We have had a Scantronic 9448+ for a while. It was installed in the house when we moved in. It has been working fine and only needed little attention over the years. I changed the battery and about 6 years ago we had a PIR changed. Recently the alarm played up. The alarm triggered when we set it almost immediately. I checked the log with 8 - enter - code and it indicated one faulty zone - actually with the recently changed PIR - and I ordered a new PIR. As the older ones are Risco I ordered a Risco iWISEBus. The PCB is different but I thought it should work.... In the process of changing the PIR I triggered the alarm a few times when wires were touching. Once the new Risco was wired up I could not arm the alarm any more. The panel is showing the tamper LED and when I key in the code I can hear a beep. I have not opened the main panel yet. I have attached a picture of the wired in Risco iWISEBus. Can anyone help please. Why should the alarm start showing the tamper LED constantly after alarms have been triggered? Quote
james.wilson Posted October 4, 2023 Posted October 4, 2023 Isn't the iwise bus a bus detector that will only work on a risco panel? You have also probably blown the fuse or panel. Wires shouldn't 'touch' 2 Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
PeterJames Posted October 5, 2023 Posted October 5, 2023 22 hours ago, james.wilson said: Isn't the iwise bus a bus detector that will only work on a risco panel? You have also probably blown the fuse or panel. Wires shouldn't 'touch' QFA Bus detectors or ID detectors from a different brand will not work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.