Break glass keeps going off

[Hpatz1]

Have installed an alarm in my shop. Texecom elite system. 
we have a risco break glass sensor fitted onto the ceiling. 
we have a double door system but when the door closes it tends to slam and this sets of the break glass sensor. Also there is a mag lock on the door and that locking also causes the sensor to go off

[sixwheeledbeast]

Was there a question?

Replace and/or resite the breakglass if that's the most appropriate equipment to use, it's not fit for the job as is.

[Hpatz1]

Sorry. What is the best thing to do. 
 

would it be a faulty sensor. 
what’s the best break glass sensor to use?

[PeterJames]

1 hour ago, Hpatz1 said:

what’s the best break glass sensor to use?

A motion sensor

[Hpatz1]

We have a motion sensor but if glass is broken this won’t set the motion sensor off

[al-yeti]

45 minutes ago, Hpatz1 said:

We have a motion sensor but if glass is broken this won’t set the motion sensor off

What kind of frames ?

 

Shocks could work provided no one bangs on the windows at night 

[Hpatz1]

Aluminium. Would it be ok to use shocks. Double knock? Would that still be grade 3 certified 

[sixwheeledbeast]

DIY can't do Grade 3. Double Knock doesn't conform to any standard.

Motion detection fitted correctly can cover a window area if the window was broken.

Hence the question is a glass break the correct detection for the task, most often they are not.

[Hpatz1]

So if I the shock sensors on double knock to prevents false alarms from someone banging the window. This wouldn’t be grade 3?

[james.wilson]

Double knock doesn't comply. Windows tend to only break once too. 

You might be better with window foil. I hate glass break sensors generally but I'd suggest a different glass break detector assuming you have it sited correctly.