Connecting a Scantronic 9448+ to an from Connecting a Scantronic 9448+ to an Eaton SDR-WEXT-00 external sounder

[SalopMan]

The 9448+ control box doesn't have its own keypad so I need to connect the remote keypad as a minimum.

[james.wilson]

looks like the 2 tamper loops are linked out. 

Can you confirm with a meter?

Is this brand new? or from a dubious source?

[SalopMan]

I have checked with  meter that the tamper lopps are both connected.

 

The equipment was supplied as a kit by alertelectrical.com and it all looks to be brand new.

[james.wilson]

Great. I'd assume. It is OK then

 

Seems bizarre that you have a tamper fault but all switches and loops are closed

[al-yeti]

5 hours ago, SalopMan said:

I have checked with  meter that the tamper lopps are both connected.

 

The equipment was supplied as a kit by alertelectrical.com and it all looks to be brand new.

Keypad tamper is open 

[SalopMan]

I simply hadn't secured the tamper switch on the control box tightly enough. Everything seems to work as expected now. Amateurs eh ?

Thanks again to you both for trying to help.

I now need to connect the sounder/strobe box. The connections aren't obvious but I'll post this as another topic in this forum I think.