in need of advise

[Guest stanaway]

hi,

i have recently recieved a veritas intruder system from a friend who moved house.

I have all but wired it up but have got stuck at the point of connecting the external bell in to the control panel.

As i have no installation manual and cannot find out what make of bell it is i have come to a stop.

there were wires left in the bell as follows;

red +H

blk -H

grn +R

white eng

yell TR

blue ST

,and wires in the control panel as follows:

SAB

blue -VE

BLK 0v

YELL A/T

GRN BELL -VE

RED +VE

SPEAKER

BLK LS-

RED LS+

Does this make sence to anyone, and can they offer any advice short of getting someone in who knows what they are doing.

thanks

[JB_]

My guess would be an Elmdene box, simply because it's the only one i've seen with a +ve(+R) and -ve Ring terminals and the ENG terminal in it(connect 12V to it and no matter what happens the bell won't sound).

If you've got those wires correct then it seem's a little amiss to me, i'd change it to be wired as follows.

Bell

Red +H

Black -H

Green -R

Yellow TR

Blue ST

White (no connection to anything)

Panel

Red +VE (A)

Black -VE (D)

Green BELL -VE (B)

Yellow A/T ©

Blue STROBE -VE (S)

White No connection again

[JB_]

Actually thinking about it, i thought Veritas panels used A,B,C,D,S terminals on their panels for the bell connection's so i'll edit my post to show which is which.

[Guest stanaway]

many thanks for your advise i shall give this a try,

kind regards,

STAN.